以文本方式查看主题

-  声学楼论坛  (http://nju520.com/bbs/index.asp)
--  软件应用及仿真室  (http://nju520.com/bbs/list.asp?boardid=2)
----  怎样设定FINEMOTOR 导线直径？  (http://nju520.com/bbs/dispbbs.asp?boardid=2&id=21027)
--  作者：ziduvince
--  发布时间：2011-7-11 9:24:34
--  怎样设定FINEMOTOR 导线直径？
各位大侠，Nom.(bare)Wire diam这个参数怎样确定?改过DEFROUND.FMW文件的值，但是读不到我改的那一行。怎样才能弄好？感谢指教！
--  作者：水仙
--  发布时间：2011-7-11 14:29:33
--  
FINEMotorRoundWireSizesFile - DO NOT delete the top 2 lines
specify ID,OD - Conductor diameter and overall diameter - upto 128 values.
0.020,0.026
0.025,0.033
0.028,0.038
0.030,0.040
0.032,0.041
0.034,0.043
0.036,0.047
0.040,0.052
0.050,0.065
0.056,0.072
0.060,0.077
0.063,0.081
0.071,0.091
0.080,0.101
0.090,0.113
0.100,0.125
0.106,0.132
0.11,0.136
0.112,0.139
0.118,0.146
0.12,0.149
0.125,0.154
0.13,0.159
0.132,0.161
0.140,0.170
0.150,0.181
0.160,0.192
0.170,0.203
0.180,0.214
0.190,0.225
0.200,0.236
0.210,0.247
0.212,0.249
0.220,0.258
0.224,0.262
0.230,0.269
0.236,0.275
0.240,0.280
0.250,0.290
0.260,0.302
0.265,0.307
0.270,0.312
0.280,0.323
0.290,0.333
0.300,0.344
0.315,0.355
0.320,0.365
0.335,0.381
0.350,0.397
0.355,0.403
0.370,0.418
0.375,0.424
0.400,0.450
0.425,0.476
0.450,0.503
0.475,0.530
0.500,0.556
0.55,0.62
0.6,0.672
0.65,0.724
0.70,0.776
0.75,0.83
0.8,0.882
0.85,0.934
0.9,0.986
--  作者：ziduvince
--  发布时间：2011-7-11 20:44:53
--  

我改了这个文件里边的内容。

FINEMOTOR 的默认选项是0.224,0.262。

我把第一行0.020,0.026，

改成0.005,0.006，但是改完后，CACULATED WENDING 里的Nom.(bare)Wire Diam,显示的还是0.224。关闭FINEMOTOR后，再打开，显示的也是0.224.

我把0.224,0.262这一行，改成0.005,0.006后，FINEMOTOR提示找不到0.224的数据，就把值设置成0.220.

我是在那个环节没做好呢？