主题：[求助]LSPＣＡＤ5.25使用疑难

此主题相关图片如下：

这是LEAP4的阻抗模型。跟MLSSA模型没有一一对应关系。

此主题相关图片如下：

LSPCAD525不能导入LEAP4参数。

FINECONE可以导入MLSSA和LMS的阻抗和频响曲线。

其电学模型（阻抗）也是类似MLSSA的。

 

此主题相关图片如下：

1. Re (ohms). Note this can be set to Zmin (minimum impedance over Fs) to better simulate the actual impedance and thereby the actual SPL level. The red speaker symbol , indicates import from FINEMotor.
2. The standard model has two inductors. Le1 (mH) is a serial inductor.
3. Le2 (mH) is the second serial inductor, which is paralleled by a resistor (Rp).
4. Rp (ohms) is the parallel resistor over Le2.
5. Bl is the force factor of the driver motor.
6. The advanced setting is for importing a measured impedance curve.

 

不能.