声学楼论坛技术交流区室内声学与噪声控制室 → An interesting way to calculate the reverberation time while you decorate you own listeining room


  共有7039人关注过本帖树形打印复制链接

主题:An interesting way to calculate the reverberation time while you decorate you own listeining room

帅哥哟,离线,有人找我吗?
neil
  1楼 | 信息 | 搜索 | 邮箱 | 主页 | UC


加好友 发短信
等级:论坛游侠 帖子:28 积分:613 威望:0 精华:0 注册:2006-12-11 22:41:01
An interesting way to calculate the reverberation time while you decorate you own listeining room  发帖心情 Post By:2012-11-30 9:50:01 [只看该作者]

Calculation of Reverberation Time

Reverberation time is the time required for a steady-state sound to reach one millionth or -60dB of its original intensity.

There are several models used in calculating the reverberation time but the first and most commonly used is that of Wallace Sabine (1868-1919). The Sabine equation

states that the reverberation time (Tr, in seconds) is directly proportional to the volume of the room (V, [m3]) and inversely proportional to the room's effective surface area (A, [m2]). The effective surface area is the sum of the product of an area covered by a particular material and the material's absorption coefficient.

The units of aA are sabins. For a surface of area A and with absorption coefficient a, aA can be thought of as the equivalent area of a perfect absorber (open window). The absorption coefficient varies with frequency and so the reverberation time is a function of frequency.

The above table was scanned from page 324 of Donald Hall's Musical Acoustics text published by Brooks/Cole, ISBN 0-534-13248-0.

another table can be found at this link.

Example: Calculate the reverberation time at 125Hz, 500Hz, and 2000Hz for a classroom that is 8m wide by 12m long by 3m high. The floor is vinyl tile on concrete, the walls are made of 1/2" drywall (gypsum) board, and the ceiling is acoustic tile suspended in frames.

Surface

Area [m2]

a125*Area [sabins]

a500*Area [sabins]

a2000*Area [sabins]

Walls

120

36

6

8.4

Floor

96

1.9

2.9

2.9

Ceiling

96

48

57.6

67.2

Total Effective Area

85.9

66.5

78.5

Frequency

125 Hz

500Hz

2000Hz

Reverb Time

0.55 sec

0.70 sec

0.60 sec

Sample Reverb Calculation for 125 Hz

This room will have an appropriate reverb time for speech but is too short at all frequencies for any type of musical performance. The room will be bright with a high degree of clarity but because of the parallel surfaces will suffer from resonances. The surfaces are close enough that no echoes will be detected. Adding wood/metal seating will not change the reverb time very much, but allowing the seats to be occupied will greatly increase the effective area and lower the reverb time.


 回到顶部
帅哥哟,离线,有人找我吗?
聲學樓一等兵
  2楼 | 信息 | 搜索 | 邮箱 | 主页 | UC


加好友 发短信
等级:职业侠客 帖子:117 积分:781 威望:0 精华:0 注册:2012-8-10 16:49:39
  发帖心情 Post By:2012-11-30 13:44:48 [只看该作者]

Copy存檔先.                                                                                                                                                       ......  


 回到顶部
帅哥哟,离线,有人找我吗?
skyla03
  3楼 | 信息 | 搜索 | 邮箱 | 主页 | UC


加好友 发短信 坎坷的喇叭仔
等级:黑侠 帖子:383 积分:2496 威望:0 精华:0 注册:2011-5-10 9:54:05
  发帖心情 Post By:2012-12-1 10:38:28 [只看该作者]

和楼上一样,慢慢看~~

 回到顶部